-
Selective cutting height
A cutting height setting can be selected from either 600mm (standard) or 1000mm (optional) depending on the application and material size.Larger blade size
A larger blade size of 67mm x 1.6mm is used in contrast with conventional models.Further larger model
VM-6500 is available as a special model characterized by a table stroke of 6500mm and capability of cutting large materials.Use of servo motor and linear guide
An AC servo motor and a LM guide are used to move the table for the purpose of accurate cutting control.Automatic adjustment of guide position
Once a material size is preset, automatic adjustment can be made to determine an optimum guide position. Upon completion of cutting, automatic stop will take place.Automatically adjustable wire brush
Wire brush contact is automatically adjusted in proportion to wear of wire brush.
A message will be displayed to prompt a user to replace the wire brush, when excessive wear is detected.Excellent operability
The color display and touch panel facilitate operation.
The embedded CNC-Lite function automatically sets optimum cutting conditions.Permissible loading mass
In response to a trend toward larger materials, the machine table offers 12000kg loading mass. -
Back gauge and end stopper
A combination of the NC back gauge and the end stopper facilitates setup for product dimension and accuracy and significantly reduces setup time. The NC back gauge can be easily positioned by entering dimensions through the numeric pad and pressing the START button for positioning.
Full open table
This vertical band saw can use a table in full open mode and facilitates material handling. Using the optional T-groove version allows a user to cut irregular-shaped materials.
Elimination of waste
This model developed with a focus on one of the objectives “effective use of materials” can cut the end of a material to 3mm and helps to save expensive materials without scraping as waste unlike in conventional practice.
Blade speed and cutting feed
Blade speed and cutting feed (table stroke) settings can be easily done by using the operation panel located in front of the machine. Cutting conditions optimum for the target materials can be quickly preset.
-
Orbit-X Pullers are used for pulling & pushing of bearing & similar like applications.Orbit-X has variety of Pullers as per the requirement of application.
-
-
Ideal for cost reduction and quality improvement!
EXP_ECO The “Eco Tube Expanders” is a rolling type tube expansion tool used for fixing tubes to tube sheets during the manufacturing process for heat exchangers.
With Sugino’s original metal surface improvement treatment, tube expansion can be performed without lubrication, achieving cost reduction and surface quality improvement at the same time.Special three-roller types: MB-W Type, CB-W Type, HB-W Type
Special five-roller type: CB-E5W Type -
Orbit-X Electric Torque Wrenches are operated by inbuilt Electric geared motor (single phase). Torque can be pre-set within the torque range provided by the model the pre-set torque gets delivered on the nut. Orbit-X has variety of Electric Torque Wrenches for various Square drive sizes, RPM & Torque.
-
Cut off tube protrusion easily!
The “Facing Tool” is a tube end facing tool for keeping tube protrusion uniform.
Two types of cutters are available depending on the tube end shapes, one for flat surfaces and the other for round surfaces. -
Ideal for tube end curling!
EXP_FB The “Tube Expanders FB” are rolling type tube expansion tools used for fixing tubes to tube sheets during the manufacturing process for heat exchangers.
Since it can perform parallel tube expansion and curling simultaneously, processing time can be greatly reduced.
Special five-roller type
-
Perfect for cutting circular grooves on inner holes! The “Grooving Tool” is used for cutting circular grooves on the inner surface of tubing, and for chamfering hole edges. Two types of rectangular cutters are available, one with a single blade and the other with a double blade.
-
Reduces tube expansion time significantly!
The “High-speed Tube Expander” is a rolling type tube expansion tool used for fixing tubes to tube sheets during the manufacturing process for heat exchangers.
By making the feed angle larger, we made it possible to shorten the tube expansion time significantly.
Special three-roller types: MB-V Type, CB-V Type, HB-V Type
Special five-roller type: CB-VE5 Type (five-roller type) -
-
OrbitX make Bolt Tensioners are used for swift method of tightening & opening by tensioning bolt /studs. After apply the oil pressure by OrbitX Hydraulics Pump, Load cell lift the puller up side i.e. tightly gripped with stud bolt thread. This cause release of nut and it becomes loosen. Nut can be easily rotated with nut rotating socket and tommy bar and tightening completed the same process is used for swift loosening operating it mainly consists of Load Cell, puller, Nut Rotating Sockets & Bridge.
-
Special Features
Access gap of only 3/8”(9.5mm) needed.
3/4”(19.0mm) of vertical lift available from each step.
Max. height of 50mm on 4th step.
Automatic spring return retraction.
Interlocking first step ensures safe hold.
No Slippage due to locking.
Will lift in a straight vertical place. -
Hydraulic Hand Pumps are designed for Nut Splitters, Flange Spreaders, bolt tensioners & hydraulic lifting jack like applications. These hand pumps are compact, light weighted having long handle need much little effort to generate max working hydraulic pressure. Suitable fittings, Pressure gauge & hydraulic hoses are also supplied as per requirement of customer.
-
Orbit-X hydraulic couplers & hoses are connected in between hydraulic tool & hydraulic hand pump or hydraulic power pack to operate the hydraulic tool. Orbit-X has variety of hydraulic couplers & hoses depends on the length of hose & requirement of end fittings.
-
Product Features
High strength, Heat treated alloy steel body for better life.
Hard chrome plated ram to resist scoring and corrosion.
Single acting load return. Precise machined body for smooth operation.
Wiper to arrest ingress of foreign particles.
Easy adjustable toe fixing positions for different heights and strokes.
Grooved toe to avoid load slippage.
Custom strokes available on request.
High pressure long life seals. QCC with Plastic dust cap. Aluminium Dust Cap on Request.
Advantage to use single or multiple jack with common pump.
Adjustable legs for extra grip. Castor wheels for easy mobility in new version.
Port size 3/8th inch NPT.
