-
Blade suitable for cutting general steel, cast iron and nonferrous metal materials with small diameters.
Blade tooth tips made of AMADA’s original special alloy tool steel
AMADA’s proprietary heat treatment technology to give unparalleled toughness and hardness to carbon blades
Suitable for cutting general steel, cast iron and nonferrous metal materials with small diameters
-
Versatile carbon contour blade available in different sizes.
Versatile contour blade with the longest history and heritageThis is a contour blade made of AMADA’s original material with special heat treatment.
This model has a much wider variety of sizes compared to other manufacturers’ products.
It is suitable for not only metal materials but also lumber and plastic materials. -
Thick blade capable of cutting a curved contour under harsh cutting conditions.
Developed for auto contour curve cutting under harsh cutting conditions
This model is the thicker version of A.
It features AMADA’s unique tooth profile design with a 5˚ positive rake angle in the same fashion as A. Long-lasting excellent sharp cutting is ensured. -
Flat-Set type and Triple-chip tooth profile (FST)
FST tooth geometry reduces cutting resistance and improved wear resistance.Cutting performance improved
Enhanced cutting performance from a tighter tolerance grind.Chipping suppressed
Best suited carbide tip improved chipping resistance. -
Carbide blades with improved durability intended for general-purpose band saws.
Set tooth type adopted
The adoption of the set tooth type, which has been used for a wide variety of blades and highly reputed, helps reduce cutting resistance and minimize blade deviation.
Tooth tip micro-chamfering
Micro-chamfering minimizes tooth tip chipping of general-purpose band saws during cutting.
-
Blade capable of cutting difficult-to-cut materials at a high cutting rate such as stainless steel and hot work die steel materials.
Five dispersed kerf type tooth shape
High speed cutting and lower cutting resistance during the cutting of difficult-to-cut, large materials (alloy tool steel and stainless steel).Tooth tip micro-chamfering
Delivers high speed cutting and reduces tooth chipping.EXCOAT-DP
Super levels of hardness, high resistance to temperatures, and strengthened coating adhesion technology. -
Blade suitable for cutting difficult-to-cut materials such as Inconel and titanium alloy.
Flat-Set type and Triple-Chip tooth profile (FST tooth geometry)
Dependable sawing on highly abrasive materials.Sharp-edge tooth tip (Sharpest tooth form)
Increased tooth penetration on hardened materials.Utilizing a new and improved grade of carbide chip
Optimized blade material with improved wear resistance.
Increased edge material hardness compared to conventional products.Wide set specification of measure against pinching
Lineup of AXCELA H WS improved measure against pinching for most difficult-to-cut materials. -
Standard model suitable for difficult-to-cut materials.
Cutting surface improved
Excellent in straightness and symmetrical tooth shape/dove tail tooth shape two-piece pattern.Cutting performance improved
Enhanced cutting performance from a tighter tolerance grind.Chipping suppressed
Best suited carbide tip improved chipping resistance. -
Carbide blades with excellent vibration isolation performance.
Reduced chattering vibrations by long pattern
The single long pattern featuring 7-tooth per group x 6-tooth pitch = 42-tooth pitch/pattern with a kerf dispersion tooth profile contributes to minimized vibrations with the same frequency and reduced vibrations during cutting.
Tooth tip with sharp edge
The sharp tooth tip form ensures enhanced cutting performance. -
Blade suitable for cutting general steel, cast iron and nonferrous metal materials with small diameters
Blade body with improved fatigue strength.Blade tooth tips made of AMADA’s original special alloy tool steel
AMADA’s proprietary heat treatment technology for improving the fatigue strength of the blade body
Suitable for cutting materials with small diameters, such as general steel, cast iron, nonferrous metal and tool steel materials that may cause a high degree of cutting resistance
-
High productivity
Dyna Guide, a new technology, reduces the undulation on the cutting surface by increasing the rigidity when circular saw blade engages the material. Moreover, Dyna Guide achieves high precision cutting by suppressing vibration and swinging of circular saw blade.
Adopts horizontal linear guide system for new saw head mechanism.Improvement of work environment
Round bar shooter can be reducedthus reducing the chips mixed into the product box.
The new sliding door feasture for the front cover, reduces the work space. -
Blade capable of cutting various materials ranging from roll-formed section steel to solid materials with small diameters.
Blade made of modified high speed steel characterized by significantly improved toughness, based on M42 cobalt high speed steel
Innovative twin set & proprietary tooth profile in the Hi-Lo configuration to prevent overload cutting
Positive rake angle for higher cutting performance
Special treatment and processing to eliminate break-in process
This blade is developed for the purpose of preventing chipping and expanding coverage. It is suitable for cutting roll-formed section steel, structural steel mild steel materials with small diameters
-
Triple hybrid tooth profile
Gulf galette shape improves blade fatigue life.
Chip curler improves chip discharge and suppresses bending.
High positive rake angle reduces cutting resistance when cutting difficult to cut materials.Adoption of AMADA M71 High-Speed Steel
AMADA’s exclusive M71 HSS with a special heat-treatment process greatly improves cutting performances and blade life.EXCOAT-DP
Super levels of hardness, high resistance to temperatures, and strengthened coating adhesion technology. -
Bi-metal contour blade made of high speed steel and designed for cutting difficult-to-cut materials.
Bi-metal blade developed for contour machines
“No breakage, no bend and long-lasting sharp cutting” – three requisites essential to blades for contour cutting of various steel materials
AMADA’s original tungsten high speed steel for the blade teeth and tough special spring steel for the blade body
-
-
Extra large metal cutting machine
Extra large band saw models H-1300II, H-1600II and H-2116II are capable of cutting φ1300 or 1300 square, φ1600 or 1600 square and φ1600 or 2100 wide x 1600 high respectively.
Cutting performance covering all types of large materials
A bi-metal extra wide blade (SGLB or MAGNUM) is used, which easily cuts large materials and difficult-to-cut materials. Variable blade speed allows a user to select desired blade speed as required for materials ranging from regular steel materials to difficult-to-cut materials.
High rigidity construction
A clamping force of the powerful hydraulic wide vise can cover round, square and irregularly-shaped materials. The maximum loading masses of the models are 24000kg, 40000kg and 40000kg respectively with a large table.
Cutting speed monitoring and cutting depth setting unit
Cutting speed can be quickly observed through the digital counter.
Feed table used to feed materials
Materials are fed by the 180mm stroke table.
