Fully automatic tube end facing!
The “Power Facer” is a pneumatic, tube end facing tool for finishing the ends of tubing into various shapes during the manufacturing process for heat exchangers.
Just press the switch to perform tube end finishing. There is no reaction force involved in the process, significantly reducing worker fatigue.
Perfect for cutting circular grooves on inner holes! The “Grooving Tool” is used for cutting circular grooves on the inner surface of tubing, and for chamfering hole edges. Two types of rectangular cutters are available, one with a single blade and the other with a double blade.
Ideal for cost reduction and quality improvement!
EXP_ECO The “Eco Tube Expanders” is a rolling type tube expansion tool used for fixing tubes to tube sheets during the manufacturing process for heat exchangers.
With Sugino’s original metal surface improvement treatment, tube expansion can be performed without lubrication, achieving cost reduction and surface quality improvement at the same time.
Special three-roller types: MB-W Type, CB-W Type, HB-W Type
Special five-roller type: CB-E5W Type
Easily polish expanded tubing!
The “Tube Polisher” is an exterior polishing tool for polishing the outer surface of expanded tubing during the manufacturing process for heat exchangers.
A highly-efficient air motor rotates/revolves the abrasive belt, providing a uniform, efficient polishing of the outer surface with the tube fixed.
