Coated circular saw blade for cutting stainless steel materials, characterized by high wear resistance.
Edge material specifications
Carbide tips with high toughness is coated original.
Target materials
Excellent in deposition resistance and wear resistance suited, and stable life and cutting quality is provided with cutting stainless steels due to the coating effect.
| Name | TCB-TI SU | |||||||
| Outer diameter（mm） | Inner diameter（mm） | Blade thickness（mm） | Number of teeth | |||||
| 40 | 54 | 60 | 72 | 80 | 100 | |||
| 240 | 32 | 1.75 | ● | ● | ||||
| 250 | 32 | 2.0 | ● | ● | ||||
| 285 | 32 | 2.0 | ● | ● | ||||
| 285 | 40 | 2.0 | ● | ● | ||||
| 360 | 40 | 2.6(2.5) | ●(2.6) | ●(2.5) | ●(2.5) | |||
| 360 | 50 | 2.6(2.5) | ●(2.6) | ●(2.5) | ●(2.5) | |||
| 460 | 50 | 2.7 | ● | ● | ||||
● : Standard item
Bi-metal contour blade made of high speed steel and designed for cutting difficult-to-cut materials.
Bi-metal blade developed for contour machines
“No breakage, no bend and long-lasting sharp cutting” – three requisites essential to blades for contour cutting of various steel materials
AMADA’s original tungsten high speed steel for the blade teeth and tough special spring steel for the blade body
Circular saw blade suitable for cutting stainless steel materials.
Edge material specifications
Uses carbide tips with high toughness.
Target materials
Minimized adhesion of chips to prevent tooth chipping caused by chip inclusion with cutting stainless steels.
Versatile blade capable of cutting steel materials ranging from structural steel to stainless steel (with small and medium diameters).
Varying tooth set pattern contributory to lower cutting noise.
Adoption of M42 cobalt high-speed steel
Varying tooth set pattern which lowers resonance and noise during cutting
Suitable for cutting solid materials and covering a wide range from general steel to difficult-to-cut materials
Blade suitable for cutting structural steel materials (blade advantageous in tooth chipping resistance).
The “Protector” located on the tooth tip relief faces prevents excessive cutting and continuous tooth chipping
Innovative blade developed with a focus on the prevention of chipping during the cutting of structural steel materials subjected to severe vibration
Special treatment and processing to eliminate the need of break-in cutting
Blade made of modified high speed steel characterized by significantly improved toughness, based on M42 cobalt high speed steel
