Bi-metal contour blade made of high speed steel and designed for cutting difficult-to-cut materials.
Bi-metal blade developed for contour machines
“No breakage, no bend and long-lasting sharp cutting” – three requisites essential to blades for contour cutting of various steel materials
AMADA’s original tungsten high speed steel for the blade teeth and tough special spring steel for the blade body
| Name | GLB | |||||||
| Blade width （mm） |
Blade thickness （mm） |
Pitch | ||||||
| 4 | 6 | 8 | 10 | 12 | 14 | 18 | ||
| 3 | 0.64 | ● | ● | |||||
| 0.90 | ● | |||||||
| 4 | 0.64 | ▲ | ● | ● | ||||
| 0.90 | ● | ● | ● | |||||
| 5 | 0.64 | ▲ | ● | ● | ● | |||
| 0.90 | ● | ● | ● | |||||
| 6 | 0.64 | ▲ | ● | ● | ● | ● | ||
| 0.90 | ▲ | ● | ● | ● | ● | ● | ||
| 8 | 0.64 | ▲ | ● | ● | ● | ● | ||
| 0.90 | ▲ | ● | ● | ● | ● | ● | ||
| 10 | 0.64 | ● | ● | ● | ● | ● | ● | |
| 0.90 | ● | ● | ● | ● | ● | ● | ||
| 13 | 0.64 | ▲ | ▲ | ▲ | ▲ | ▲ | ||
| 0.90 | ● | ● | ● | ● | ● | ● | ||
● : Standard item ▲ : Special order required
Blade suitable for cutting difficult-to-cut materials such as Inconel and titanium alloy.
Flat-Set type and Triple-Chip tooth profile (FST tooth geometry)
Dependable sawing on highly abrasive materials.
Sharp-edge tooth tip (Sharpest tooth form)
Increased tooth penetration on hardened materials.
Utilizing a new and improved grade of carbide chip
Optimized blade material with improved wear resistance.
Increased edge material hardness compared to conventional products.
Wide set specification of measure against pinching
Lineup of AXCELA H WS improved measure against pinching for most difficult-to-cut materials.
Blade suitable for cutting structural steel materials (blade advantageous in tooth chipping resistance).
The “Protector” located on the tooth tip relief faces prevents excessive cutting and continuous tooth chipping
Innovative blade developed with a focus on the prevention of chipping during the cutting of structural steel materials subjected to severe vibration
Special treatment and processing to eliminate the need of break-in cutting
Blade made of modified high speed steel characterized by significantly improved toughness, based on M42 cobalt high speed steel
Coated circular saw blade for cutting stainless steel materials, characterized by high wear resistance.
Edge material specifications
Carbide tips with high toughness is coated original.
Target materials
Excellent in deposition resistance and wear resistance suited, and stable life and cutting quality is provided with cutting stainless steels due to the coating effect.
Carbide blades with excellent vibration isolation performance.
Reduced chattering vibrations by long pattern
The single long pattern featuring 7-tooth per group x 6-tooth pitch = 42-tooth pitch/pattern with a kerf dispersion tooth profile contributes to minimized vibrations with the same frequency and reduced vibrations during cutting.
Tooth tip with sharp edge
The sharp tooth tip form ensures enhanced cutting performance.
