Orbit-X make Impact Sockets & Accessories are made from high strength alloy steel, these Sockets & Accessories are heat treated for strength and impact resistance. As per requirements these Sockets & Accessories are plated and black oxidized coated for increased protection from rusting. Sockets are mounted on nuts to apply the torque either by handles or by powered tools.
Impact Sockets & Accessories
Description
All Impact Sockets are made from high strength alloy steel.
All Impact Sockets are heat treated for the best combination of strength and impact resistance.
All Impact Sockets have an optimum wall thickness for strength and access on fasteners having restrictions.
The depth of the Hex openings is designed to accomodate the full standard fastener head.
All Impact Sockets have chamfered openings for ease in engagement with the drive tool and the fastener.
Concentric openings and large clearance holes to meet industrial specifications.
All Impact Sockets have a Ring-N-Pin arrangement for securing them to the drive.
Sockets are plated and black oxidized coated for increased protection from rusting.
Related products
-
OSD Series Hydraulic Torque Wrenches
FEATURES
One-piece Forming Machine body made of aluminum titanium alloy, high strength, high tenacity and design to exert torque on toughest for a smaller operating radius.
Orbit-X hydraulic torque wrenches are one of the most advanced tools in the industry. Some of the features of Orbit-X hydraulic torque wrenches are as below: Accuracy in repeatability, Very few moving parts, Fast stoke & designed to fit each application. Orbit-X manufactures two series of Hydraulrenches as fic Torque Wollows: -
Torque Multiplier is a simple gear box, works on the principle of ‘Epicyclic Gearing’. The given torque at the input gets multiplies as per the multiplication factor and transmitted at the output, hence with a minimum efforts it can achieve greater torque. Torque Multiplier can be of single or more stages multiplication ration accordingly. Orbit-X manufacture Torque multipliers for ratio: 5:1, 25:1 & 125:1 as per the requirement of customers.
-
OrbitX make Bolt Tensioners are used for swift method of tightening & opening by tensioning bolt /studs. After apply the oil pressure by OrbitX Hydraulics Pump, Load cell lift the puller up side i.e. tightly gripped with stud bolt thread. This cause release of nut and it becomes loosen. Nut can be easily rotated with nut rotating socket and tommy bar and tightening completed the same process is used for swift loosening operating it mainly consists of Load Cell, puller, Nut Rotating Sockets & Bridge.
-
Special Features
Access gap of only 3/8”(9.5mm) needed.
3/4”(19.0mm) of vertical lift available from each step.
Max. height of 50mm on 4th step.
Automatic spring return retraction.
Interlocking first step ensures safe hold.
No Slippage due to locking.
Will lift in a straight vertical place.
