Titanium-coated circular saw blade with excellent wear resistance.
Edge material specifications
Carbide tips with high toughness is coated original.
Target materials
Both chipping resistance and wear resistance, stable life and cutting quality is provided with cutting structural carbon steels, structural alloy steels, pipes and special steel (except for stainless steels and heat-resisting steels).
| Name | TCB-TIII | |||||||
| Outer diameter（mm） | Inner diameter（mm） | Blade thickness（mm） | Number of teeth | |||||
| 40 | 54 | 60 | 72 | 80 | 100 | |||
| 250 | 32 | 2.0 | ● | ● | ||||
| 285 | 32 | 2.0 | ● | ● | ||||
| 285 | 40 | 2.0 | ● | ● | ||||
| 360 | 40 | 2.6(2.5) | ●(2.6) | ●(2.5) | ●(2.5) | |||
| 360 | 50 | 2.6(2.5) | ●(2.6) | ●(2.5) | ●(2.5) | |||
| 460 | 50 | 2.7 | ● | ● | ||||
● : Standard item
Thin blade for higher productivity.
Thinner than regular blade – smaller blade thickness for smaller kerf and lesser material lost
Smaller blade thickness which lowers cutting resistance
Using this blade in a PCSAW Series model produces a synergetic effect with pulse cutting, which further reduces cutting resistance and chips
Offered in product lineups of SGLB and MAGNUM Series
Best selling versatile blade capable of cutting steel materials ranging from structural steel to stainless steel.
Adoption of M42 cobalt high-speed steel
Suitable for cutting solid materials ranging from general steel to difficult-to-cut materials
Widest array of product lineups to cover all material shapes
Blade suitable for cutting difficult-to-cut materials such as Inconel and titanium alloy.
Flat-Set type and Triple-Chip tooth profile (FST tooth geometry)
Dependable sawing on highly abrasive materials.
Sharp-edge tooth tip (Sharpest tooth form)
Increased tooth penetration on hardened materials.
Utilizing a new and improved grade of carbide chip
Optimized blade material with improved wear resistance.
Increased edge material hardness compared to conventional products.
Wide set specification of measure against pinching
Lineup of AXCELA H WS improved measure against pinching for most difficult-to-cut materials.
Carbide blades with improved durability intended for general-purpose band saws.
Set tooth type adopted
The adoption of the set tooth type, which has been used for a wide variety of blades and highly reputed, helps reduce cutting resistance and minimize blade deviation.
Tooth tip micro-chamfering
Micro-chamfering minimizes tooth tip chipping of general-purpose band saws during cutting.
