Circular saw blade suitable for cutting general mild steel materials.
Edge material specifications
Uses cermet tips with excellent wear resistance and deposition resistance.
Target materials
Excellent in chipping resistance and suited for cutting a wide range of materials such as structural carbon steels, structural alloy steels and pipes.
| Name | TCB-CB | |||||||
| Outer diameter（mm） | Inner diameter（mm） | Blade thickness（mm） | Number of teeth | |||||
| 40 | 54 | 60 | 72 | 80 | 100 | |||
| 240 | 32 | 1.75 | ● | ● | ||||
| 285 | 32 | 2.0 | ● | ● | ||||
| 360 | 40 | 2.6(2.5) | ●(2.6) | ●(2.5) | ●(2.5) | |||
| 360 | 50 | 2.6(2.5) | ●(2.6) | ●(2.5) | ●(2.5) | |||
| 380 | 40 | 2.6(2.5) | ●(2.6) | ●(2.5) | ●(2.5) | |||
| 460 | 50 | 2.7 | ● | ● | ||||
● : Standard item
Blade suitable for cutting difficult-to-cut materials such as Inconel and titanium alloy.
Flat-Set type and Triple-Chip tooth profile (FST tooth geometry)
Dependable sawing on highly abrasive materials.
Sharp-edge tooth tip (Sharpest tooth form)
Increased tooth penetration on hardened materials.
Utilizing a new and improved grade of carbide chip
Optimized blade material with improved wear resistance.
Increased edge material hardness compared to conventional products.
Wide set specification of measure against pinching
Lineup of AXCELA H WS improved measure against pinching for most difficult-to-cut materials.
Flat-Set type and Triple-chip tooth profile (FST)
FST tooth geometry reduces cutting resistance and improved wear resistance.
Cutting performance improved
Enhanced cutting performance from a tighter tolerance grind.
Chipping suppressed
Best suited carbide tip improved chipping resistance.
Thick blade capable of cutting a curved contour under harsh cutting conditions.
Developed for auto contour curve cutting under harsh cutting conditions
This model is the thicker version of A.
It features AMADA’s unique tooth profile design with a 5˚ positive rake angle in the same fashion as A. Long-lasting excellent sharp cutting is ensured.
Triple hybrid tooth profile
Gulf galette shape improves blade fatigue life.
Chip curler improves chip discharge and suppresses bending.
High positive rake angle reduces cutting resistance when cutting difficult to cut materials.
Adoption of AMADA M71 High-Speed Steel
AMADA’s exclusive M71 HSS with a special heat-treatment process greatly improves cutting performances and blade life.
EXCOAT-DP
Super levels of hardness, high resistance to temperatures, and strengthened coating adhesion technology.
