Thick blade capable of cutting a curved contour under harsh cutting conditions.
Developed for auto contour curve cutting under harsh cutting conditions
This model is the thicker version of A.
It features AMADA’s unique tooth profile design with a 5˚ positive rake angle in the same fashion as A. Long-lasting excellent sharp cutting is ensured.
| Name | AA-ANT | |||||
| Blade width （mm） |
Blade thickness （mm） |
Pitch | ||||
| 6 | 8 | 10 | 12 | 14 | ||
| 5 | 0.90 | ● | ● | ● | ||
| 6 | 0.90 | ● | ● | ● | ● | |
| 8 | 0.90 | ● | ● | ● | ● | |
| 10 | 0.90 | ● | ● | ● | ● | ● |
● : Standard item
Blade suitable for cutting difficult-to-cut materials such as Inconel and titanium alloy.
Flat-Set type and Triple-Chip tooth profile (FST tooth geometry)
Dependable sawing on highly abrasive materials.
Sharp-edge tooth tip (Sharpest tooth form)
Increased tooth penetration on hardened materials.
Utilizing a new and improved grade of carbide chip
Optimized blade material with improved wear resistance.
Increased edge material hardness compared to conventional products.
Wide set specification of measure against pinching
Lineup of AXCELA H WS improved measure against pinching for most difficult-to-cut materials.
Standard model suitable for difficult-to-cut materials.
Cutting surface improved
Excellent in straightness and symmetrical tooth shape/dove tail tooth shape two-piece pattern.
Cutting performance improved
Enhanced cutting performance from a tighter tolerance grind.
Chipping suppressed
Best suited carbide tip improved chipping resistance.
Carbide blades with improved durability intended for general-purpose band saws.
Set tooth type adopted
The adoption of the set tooth type, which has been used for a wide variety of blades and highly reputed, helps reduce cutting resistance and minimize blade deviation.
Tooth tip micro-chamfering
Micro-chamfering minimizes tooth tip chipping of general-purpose band saws during cutting.
Blade suitable for cutting structural steel materials (blade advantageous in tooth chipping resistance).
The “Protector” located on the tooth tip relief faces prevents excessive cutting and continuous tooth chipping
Innovative blade developed with a focus on the prevention of chipping during the cutting of structural steel materials subjected to severe vibration
Special treatment and processing to eliminate the need of break-in cutting
Blade made of modified high speed steel characterized by significantly improved toughness, based on M42 cobalt high speed steel
