Blade suitable for cutting general steel, cast iron and nonferrous metal materials with small diameters
Blade body with improved fatigue strength.
Blade tooth tips made of AMADA’s original special alloy tool steel
AMADA’s proprietary heat treatment technology for improving the fatigue strength of the blade body
Suitable for cutting materials with small diameters, such as general steel, cast iron, nonferrous metal and tool steel materials that may cause a high degree of cutting resistance
| Name | BB | |||
| Blade width （mm） |
Blade thickness （mm） |
Pitch | ||
| 3 | 4 | 6 | ||
| 25 | 0.9 | ● | ● | ● |
| 32 | 1.1 | ● | ● | ● |
● : Standard item
Carbide blades with improved durability intended for general-purpose band saws.
Set tooth type adopted
The adoption of the set tooth type, which has been used for a wide variety of blades and highly reputed, helps reduce cutting resistance and minimize blade deviation.
Tooth tip micro-chamfering
Micro-chamfering minimizes tooth tip chipping of general-purpose band saws during cutting.
Flat-Set type and Triple-chip tooth profile (FST)
FST tooth geometry reduces cutting resistance and improved wear resistance.
Cutting performance improved
Enhanced cutting performance from a tighter tolerance grind.
Chipping suppressed
Best suited carbide tip improved chipping resistance.
Best suited for medium-to large-sized difficult-to-cut materials, such as stainless steels and hot die steels.
Adoption of AMADA M71 high-speed steel
Wear resistance is markedly improved by a cutting edge of the AMADA M71 featuring 1000 HV or the highest hardness of cast high-speed tool steels.
Variable gullet depth for better chip disposal
All tooth tips effectively work to reduce cutting resistance.
Highly positive rake angle
Enhanced ability of the saw blade to into hard materials.
Versatile blade capable of cutting steel materials ranging from structural steel to stainless steel (with small and medium diameters).
Varying tooth set pattern contributory to lower cutting noise.
Adoption of M42 cobalt high-speed steel
Varying tooth set pattern which lowers resonance and noise during cutting
Suitable for cutting solid materials and covering a wide range from general steel to difficult-to-cut materials
