Thin blade for higher productivity.
Thinner than regular blade – smaller blade thickness for smaller kerf and lesser material lost
Smaller blade thickness which lowers cutting resistance
Using this blade in a PCSAW Series model produces a synergetic effect with pulse cutting, which further reduces cutting resistance and chips
Offered in product lineups of SGLB and MAGNUM Series
| Name | SMARTCUT BAND SG | SMARTCUT BAND MA | |||
| Blade width
(mm) |
Blade thickness
(mm) |
Pitch | Pitch | ||
| 2/3 | 3/4 | 2/3 | 3/4 | ||
| 41 | 0.9 | ● | ● | ● | ● |
| 54 | 1.1 | ▲ | ▲ | ||
| 67 | 1.3 | ▲ | |||
● : Standard item ▲ : Special order required
Blade suitable for cutting difficult-to-cut materials such as Inconel and titanium alloy.
Flat-Set type and Triple-Chip tooth profile (FST tooth geometry)
Dependable sawing on highly abrasive materials.
Sharp-edge tooth tip (Sharpest tooth form)
Increased tooth penetration on hardened materials.
Utilizing a new and improved grade of carbide chip
Optimized blade material with improved wear resistance.
Increased edge material hardness compared to conventional products.
Wide set specification of measure against pinching
Lineup of AXCELA H WS improved measure against pinching for most difficult-to-cut materials.
Standard model suitable for difficult-to-cut materials.
Cutting surface improved
Excellent in straightness and symmetrical tooth shape/dove tail tooth shape two-piece pattern.
Cutting performance improved
Enhanced cutting performance from a tighter tolerance grind.
Chipping suppressed
Best suited carbide tip improved chipping resistance.
Carbide blades with excellent vibration isolation performance.
Reduced chattering vibrations by long pattern
The single long pattern featuring 7-tooth per group x 6-tooth pitch = 42-tooth pitch/pattern with a kerf dispersion tooth profile contributes to minimized vibrations with the same frequency and reduced vibrations during cutting.
Tooth tip with sharp edge
The sharp tooth tip form ensures enhanced cutting performance.
Bi-metal contour blade made of high speed steel and designed for cutting difficult-to-cut materials.
Bi-metal blade developed for contour machines
“No breakage, no bend and long-lasting sharp cutting” – three requisites essential to blades for contour cutting of various steel materials
AMADA’s original tungsten high speed steel for the blade teeth and tough special spring steel for the blade body
