Full-stroke vise cylinder
The vise can be operated just by using a push button. Compared to the conventional rack type, labor and time can be saved significantly.
There is a function that slightly opens the feeding/holding vise by some millimeters when feeding material in order to prevent scratches to materials and dimensional errors.
Twist-up roller
The twist-up roller located in the insert area prevents uneven insert wear and protects the blade.
Specifications
| Model | H-400 | |
| Cutting capacity (mm) | Round (Dia) | φ420 |
| Rectangle (W x H) | 415 x 415 | |
| Blade size (W x T x L) (mm) | 34 x 1.1 x 4570 | |
| Blade speed (m/min) | 15 – 90(50Hz) | |
| 17 – 90(60Hz) | ||
| Motors (kW) | Saw blade | 5.5 |
| Hydraulic pump | 1.5 | |
| Coolant pump | 0.18 | |
| Wire brush | – | |
| Power requirement (kVA) | 11 | |
| Stroke length (mm) | – | |
| Tank capacity (L) | Hydraulic | 40 |
| Coolant | 120 | |
| Table height (mm) | 800 | |
| Allowable load (Mass of work) (kg) | 1500 | |
| Machine dimensions (W x L x H) (mm) | 2297 x 1466 x 1591 | |
| Mass of machine (kg) | 1600 | |
High productivity
Dyna Guide, a new technology, reduces the undulation on the cutting surface by increasing the rigidity when circular saw blade engages the material. Moreover, Dyna Guide achieves high precision cutting by suppressing vibration and swinging of circular saw blade.
Adopts horizontal linear guide system for new saw head mechanism.
Improvement of work environment
Round bar shooter can be reducedthus reducing the chips mixed into the product box.
The new sliding door feasture for the front cover, reduces the work space.
Middle blade guide
The world’s first middle blade guide eliminates blade chattering during the cutting of wide materials.
Minimizes blade deviation.
10° inclined blade
The shortest possible cutting length of the blade for wide material cutting underpins high speed cutting without any load on the blade.
Movable front vise
The front vise can travel 240mm and go in over the blade, which facilitate cut alignment and remnant ejection.
Stand type operation panel
The swivel stand type operation panel further increases workability and operability in the cut alignment stage.
Chip conveyor
A large-diameter chip conveyor is installed as a standard component to improve the work environment.
PF valve
The cutting process can be optimized just by setting up the PF valve to the target “material, shape and size”.
Cutting depth setting unit
The blade descends horizontally. Tooling and dovetail grooving can be easily handled by adjusting a cutting end height.
Lever type insert clamp
A foolproof lever type insert clamp is installed to the guide bracket.
Motor-driven Coolant pump
A motor-driven centrifugal pump was introduced in this model, rather than a conventional gear pump. Cutting fluid can be used and cleaned regardless of whether the main motor is ON or OFF.
Vise mechanism
Vise jaws are located on both the front and the rear sides of the blade in a well-balanced manner in order to properly feed and hold materials. This vise mechanism is capable of properly clamping small materials.
