High speed cutting
The pulse cutting technology reduces cutting resistance thereby minimizing blade teeth wear and increasing cutting rates.
High rigid structure
The post type construction gives higher rigidity than the hinge type.
Full cover
The introduction of full cover design prevents scattering of chips and cutting oil to ensure a better work environment.
SMARTCUT BAND as a standard equipment
Environment-friendly SMARTCUT BAND installed as a standard blade helps to increase yield and reduce chips produced.
Amada PCSAW-330 Band Saw Machine
Description
Specifications
| Model | PCSAW-330 | |
| Cutting capacity (mm) | Round (Dia) | φ30 – 330 |
| Rectangle (W x H) | 30 x 30 – 330 x 330 | |
| Blade size (W x T x L) (mm) | 41 x 0.9 x 4115 | |
| Blade speed (m/min) | 15 – 120 | |
| Motors (kW) | Saw blade | 3.7 |
| Hydraulic pump | 1.5 | |
| Coolant pump | 0.18 | |
| Wire brush | – | |
| Saw head | – | |
| Pulse cutting | 0.2 | |
| Power requirement (kVA) | 13 | |
| Stroke length (mm) | 500 | |
| Tank capacity (L) | Hydraulic | 33 |
| Coolant | 64 | |
| Table height (mm) | 700 | |
| Allowable load (Mass of work) (kg) | 2000 | |
| Machine dimensions (W x L x H) (mm) | 2175 x 2526 x 1882 | |
| Mass of machine (kg) | 1800 | |
Related products
-
Selective cutting height
A cutting height setting can be selected from either 600mm (standard) or 1000mm (optional) depending on the application and material size.Larger blade size
A larger blade size of 67mm x 1.6mm is used in contrast with conventional models.Further larger model
VM-6500 is available as a special model characterized by a table stroke of 6500mm and capability of cutting large materials.Use of servo motor and linear guide
An AC servo motor and a LM guide are used to move the table for the purpose of accurate cutting control.Automatic adjustment of guide position
Once a material size is preset, automatic adjustment can be made to determine an optimum guide position. Upon completion of cutting, automatic stop will take place.Automatically adjustable wire brush
Wire brush contact is automatically adjusted in proportion to wear of wire brush.
A message will be displayed to prompt a user to replace the wire brush, when excessive wear is detected.Excellent operability
The color display and touch panel facilitate operation.
The embedded CNC-Lite function automatically sets optimum cutting conditions.Permissible loading mass
In response to a trend toward larger materials, the machine table offers 12000kg loading mass. -
Selective cutting height
A cutting height setting can be selected from either 500mm (standard) or 800mm (optional) depending on the application and material size.
Selective blade size
A blade can be selected from either a standard 41 x 1.3mm blade or an optional 54 x 1.3mm blade.
Use of servo motor and linear guide
An AC servo motor and a LM guide are used to move the table for the purpose of accurate cutting control.
Automatic adjustment of guide position
Once a material size is preset, automatic adjustment can be made to determine an optimum guide position. Upon completion of cutting, automatic stop will take place.
Automatically adjustable wire brush
Wire brush contact is automatically adjusted in proportion to wear of wire brush.
A message will be displayed to prompt a user to replace the wire brush, when excessive wear is detected.Excellent operability
The color display and touch panel facilitate operation.
The embedded CNC-Lite function automatically sets optimum cutting conditions.Back gauge (optional)
Using an optional back gauge can facilitate the alignment of marks.Permissible loading mass
In response to a trend toward larger materials, the machine table offers 2000kg loading mass (5000kg for VM-2500). -
PF valve
The cutting process can be optimized just by setting up the PF valve to the target “material, shape and size”.
Cutting depth setting unit
The blade descends horizontally. Tooling and dovetail grooving can be easily handled by adjusting a cutting end height.
Lever type insert clamp
A foolproof lever type insert clamp is installed to the guide bracket.
Motor-driven Coolant pump
A motor-driven centrifugal pump was introduced in this model, rather than a conventional gear pump. Cutting fluid can be used and cleaned regardless of whether the main motor is ON or OFF.
Vise mechanism
Vise jaws are located on both the front and the rear sides of the blade in a well-balanced manner in order to properly feed and hold materials. This vise mechanism is capable of properly clamping small materials.
-
Extra large metal cutting machine
Extra large band saw models H-1300II, H-1600II and H-2116II are capable of cutting φ1300 or 1300 square, φ1600 or 1600 square and φ1600 or 2100 wide x 1600 high respectively.
Cutting performance covering all types of large materials
A bi-metal extra wide blade (SGLB or MAGNUM) is used, which easily cuts large materials and difficult-to-cut materials. Variable blade speed allows a user to select desired blade speed as required for materials ranging from regular steel materials to difficult-to-cut materials.
High rigidity construction
A clamping force of the powerful hydraulic wide vise can cover round, square and irregularly-shaped materials. The maximum loading masses of the models are 24000kg, 40000kg and 40000kg respectively with a large table.
Cutting speed monitoring and cutting depth setting unit
Cutting speed can be quickly observed through the digital counter.
Feed table used to feed materials
Materials are fed by the 180mm stroke table.
